Wireless pool cleaning robot WYBOT M1

Wybot M1 wireless pool cleaning robot

Wybot M1 is a cordless robot that will take care of pool cleaning for you. The device offers up to about 5 hours of operation on a single charge, a 120-watt motor and a flow rate of 15 m³/h (3963 GPH) to effectively remove dirt from the bottom, walls and waterline. It also supports 6 cleaning paths and 7 modes, so you can customize its operation according to your current needs. The robot will work well in pools up to 400 sq. ft.

Intelligent route planning and high cleaning precision

An advanced navigation system based on a six-axis gyroscope and infrared sensor allows the robot to plan cleaning routes in an orderly and collision-free manner. The Wybot M1 moves along 6 different paths, allowing it to thoroughly cover the entire surface of the pool without accidentally skipping parts. The device chooses the route automatically, and if necessary, you can do it yourself using the Expert mode.

Powerful suction and dual filtration system

The robot is equipped with a powerful 120W brushless motor, which generates the strong suction needed to effectively pick up both fine and larger debris. In addition, the two-level filtration system effectively traps leaves, sand and other waterborne dirt. All this makes keeping your pool clean really easy!

Cleaning the bottom, walls and water line

The M1 Wybot is not limited to the bottom of the pool. Its design allows it to climb the walls and effectively clean the water line, where dirt most often accumulates. The device can also handle ramps, steps and drains up to about 3 cm high, allowing it to work without unnecessary interruptions. You don’t have to worry about the robot getting stuck somewhere and having to rearrange it manually!

Operating modes and schedules in the app

The robot works with an app that allows you, among other things, to choose from 7 modes of operation. The available options are cleaning the entire pool, cleaning only the bottom, the walls or the water line, cleaning first the walls and then the bottom, Eco Floor and Turbo Floor. So you can easily adjust the operation of the device to suit your current needs! There is also a Cycle Timer function, which allows you to schedule cyclic cleaning. This solution allows you to keep your pool clean without having to manually start the robot every time.

It will work well in many different pools

The M1 will work well in pools of different shapes and can easily work on many surfaces, such as vinyl, fiberglass, concrete, ceramic tile and stone. It works at depths of up to 3 meters, and thanks to its powerful 10,000 mAh battery, it provides up to about 5 hours of run time. In turn, its charging will only take about 3.5 hours.

Convenient use and easy maintenance

When the charge level is already low, the robot automatically pulls up to the edge of the pool, making it easy to take it out of the water and plug it in for charging. What’s more, thanks to its clever design, access to the filters is quick and convenient, so you can rinse them in no time and get them ready for further use. Forget about complicated, time-consuming maintenance!

Included

• Cleaning robot x1
• Filter x2
• Adhesive blocks x6
• User manual x1
• Quick start guide x1
• Charger x1
• Hook x1