Tattu Plus 1.0 batteries
The Tattu Plus 1.0 series of industrial batteries has been developed for agro-culture, mapping, plant inspections, as well as other industrial sectors. The battery system is equipped with data logging, safety warnings, power calculation, charge warnings, parameter configuration, etc. The battery can also be communicated with via CAN/SMBU ports.
Safety instructions
Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.
Do not short-circuit poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers
Multimedia
| Spriegums | 44,4 V |
|---|---|
| Kapacitāte | 22000 mAh |
| Šūnu skaits | 12 |
| Connector type | AS150U |
| Balancer type | Molex/JST-XHR |
| Discharge current (continuous) | 25C |
| Discharge current (peak) | 50C |
| Garums | 116 mm |
| Platums | 172 mm |
| Augstums | 235.5 mm |
| Svars | 6058 g |
| Svars | 13,44 kg |
|---|---|
| Dimensijas | 31 × 21 × 16 cm |
| Voltage (V) | 44,4 |
| Ietilpība (mAh) | 16000 |
| Discharge current (C) | 15 |
| Svars (g) | 4740 |
| Układ celi | 12S1P |
Uzraksti atsauksmi pirmais par “Battery Tattu Plus 1.0 22000mAh 44.4V 25C 12S1P AS150U”
Saistītie Produkti
Litijs un NiMH
Litijs un NiMH
Litijs un NiMH
Litijs un NiMH
Litijs un NiMH
Litijs un NiMH
Litijs un NiMH
Atsauksmes
Pašlaik atsauksmju nav.